Dash is the most downloaded, trusted Python framework for building ML & data science web apps. Built on top of Plotly.js, React and Flask, Dash ties modern UI elements like dropdowns, sliders, and graphs directly to your analytical Python code.
| Ordering AN Bolts can be confusing because they are so different from SAE bolts. SAE bolts are identified by overall shank length, and they generally have much longer threads. AN bolts are called out by grip length, and they have shorter threads. |
Grip refers to the unthreaded portion of the shank. This is the portion of the bolt that should bear against the inside of the hole. The threaded portion is not as strong as the shank in shear and does not present a good bearing surface for the parts being bolted together. Under vibration or movement, the threads can damage the hole.
The world's most advanced turboprop. Unmatched versatility and value. The Dash 8-400 is the most productive turboprop on the market. Known as the 'network builder' due to its short take-off and landing capabilities and efficient regional operations, it comes equipped with more seats, more legroom, more cargo and offers. HDMI 2.0b and DisplayPort 1.4 over Type-C can drive dual external displays to multitask more efficiently. Plug into a new level of power with the versatile Thunderbolt 4 port for cutting-edge gear. Whatever you need, the TUF Dash F15 has you covered. The DASH eating plan used in the studies calls for a certain number of daily servings from various food groups. These are given in box. 6–8 4–5 4–5 2–3 6.
Thread Length is constant for each bolt diameter. It is calculated to be enough for one AN960 flat washer under the head, a full-height AN365 or AN310 nut, and one AN960 flat washer under the nut. Grip lengths are in 1/8' increments. AN960 washers are 1/16' thick (1/32' thick for the L version). If your application falls between two grip lengths, you can add one or two more washers to a bolt with the next longer grip.
AN bolt nomenclature follows this format:Wow Patch 4.1
ANd(H) - g(A)
d is the bolt diameter (in sixteenths of an inch)
H indicates that the head is drilled for safety wire (no H indicates undrilled head)
g refers to the grip length*
A indicates that the shank is NOT drilled for a cotter pin (no A indicates drilled shank)
Examples:AN4-15A: 1/4-28 bolt, 1 3/16' grip, undrilled head, undrilled shank
AN6-20: 3/8-24 bolt, 1 7/16' grip, undrilled head, drilled shank
AN5H-27A: 5/16-24 bolt, 2 7/16' grip, drilled head, undrilled shank
* Note: A popular misconception is that the dash number gives the shank length in full inches plus eighths of an inch (-15 would mean 1 5/8' shank length). The numbering sequence seems to back this up -- the dash numbers skip right from -7 to -10 (i.e., -8, -9, -18, -19, etc. are not used). This would be convenient, but in reality it is not the case. Each dash number specifies a different length for different bolt diameters. You must refer to a size chart or AN bolt gauge to find the correct dash number.
The bolt grip length charts linked below are especially handy when replacing non-AN bolts. Measure the total thickness of the parts being bolted together (not including washers, nut, or female threads). Locate the bolt diameter and grip length (total thickness) in the table to find the required dash size.
AN Bolt Grip Length Chart (Decimal) AN Bolt Grip Length Chart (Fractional)| Torque for dry, cadmium plated threads per FAA AC 43.13-1B | |||
|---|---|---|---|
| Bolt Size | Thread size | Full-Height Nuts (AN365 or AN310) | Half-Height Nuts (AN364 or MS21042) |
| AN3 / AN3H | 10-32 | 1.5 to 2 lb-ft | 1 lb-ft |
| AN4 / AN4H | 1/4-28 | 4 to 6 lb-ft | 2 to 3 lb-ft |
| AN5 / AN5H | 5/16-24 | 8 to 12 lb-ft | 5 to 7 lb-ft |
| AN6 / AN6H | 3/8-24 | 13 to 16 lb-ft | 8 to 10 lb-ft |
| AN7 / AN7H | 7/16-20 | 37 to 42 lb-ft | 23 to 25 lb-ft |
| AN8 / AN8H | 1/2-20 | 40 to 57 lb-ft | 25 to 34 lb-ft |
4.1 Apple
AN Bolts AN Bolt Identification GaugeDash 4 1 6 Download
Printable AN Bolt Grip Length Chart (Decimal), PDF FormatDash 4 1 6 Speed
Printable AN Bolt Grip Length Chart (Fractional), PDF Format